Taski combimat 1800

combimat
1400,1500,1600,1700,1800
ATTENTION!
Do not use the machine, before you have read and understood the
instructions of use.
Keep the instructions of use carefully in an easily accessible place so that they
can be referred to at any time.
Instructions of use

Taski combimat 1800 Specifications

General

Solution Tank Capacity	150 L
Recovery Tank Capacity	150 L
Working width	510 mm
Nominal voltage	24 V
Battery voltage	24 V
Model	Taski combimat 1800
Type	Scrubber
Power	24 V
Brush pressure	60 kg
Brush motor power	2 x 0.37 kW

Summary

Instructional Symbols

Intended Use of the Scrubber Dryer

End of Operation Procedures

Post-Cleaning Steps

Stop solution flow and drive machine to prevent dripping. Important for contact pads.

Finishing Work Procedures

Emptying the Recovery Tank

Dispose of recovered solution as per regulations. Turn off machine before emptying.

Service, Maintenance, and Care Guidelines

Recommended Service Intervals

Service required after 500 working hours or annually. Shorter intervals under rough conditions.

Contacting the Service Centre

Contact for malfunctions or orders. Provide machine type, description, and serial number.

Maintenance Precautions

Disconnect power and batteries before repairs. Use only original TASKI spare parts.

Squeegee Adjustment Guide

Adjusting Squeegee for Outer End Suction

Adjust the squeegee according to the drawing for uneven drying on the outer end.

Adjusting Squeegee for Middle Part Suction

Adjust the squeegee according to the drawing for uneven drying on the middle part.