12
If you do not drive the machine to the battery charger, then:
• after 10 min. the tool aggregate and the suction nozzle will be lifted off the
ground.
• after 10 sec. the suction aggregate turns itself off.
• you have 10 more min. of time to get to the battery charger before the machine
turns itself off.
t Choose the amount of solution with +/- button for
setting the amount (min. level 1/ max. level 7).
t Press the brush pressure button.
The indicators light up.
t Increase the brush pressure by using +/- button (min.
level 1/ max. level 4).
t specify driving direction by using the driving direction
lever (Forwards/Backwards).
Caution:
Take turning radius into account!
t By gently pressing the speed control in driving
direction, the machine is set in to motion.
The tools start to turn and the solution is fed through the
middle of the tool.
t Press slow drive button, when in delicate environment.
The indicators light up and the drive speed is reduced.
If none of the bars in the battery indicator have lit up, drive
the sweeping-suction machine to the battery charging unit.
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
To Next Page
Loading...
Need help?
General