21
I25 I24 I23 I22 I21 I20 I19 I18 I17 I16 I15 I14 I13 tr sl pt pl nl jp it fr en de da cz
Malfunctions
Transport
Transport the machine in an upright position.
Make sure that the machine is securely fastened within the transportation
vehicle.
Disposal
When it has reached the end of its operational life, the machine and its
accessories must be disposed of according to the national regulations. Your
TASKI partner can support you with proper disposal upon notification.
Technical data
Accessories
Malfunction Possible causes Troubleshooting page
Machine does not
run
Main switch switched
off
• Switch on the main
switch
19
No power supply
• Plug the power supply
cord into the mains
socket.
Power supply cord
defect
• Call for technical
assistence
Brush does not
turn
Foam generator
switch switched off
• Switch on the foam
generator switch
19
Motor defect
• Call for technical
assistence
No foam released
Sinter head closed • Unscrew sinter head
Tank is empty
• Check the tank, fill if
necessary
19
Tank lid not correctly
closed
• Check
Filter blocked • Clean filter 20
Sinter bush blocked
• Clean the sinter
bushing
Vent opening / filter
blocked
• Empty tank, then clean
the vent opening / filter
20
Foam outlet to the
cylinder brush
blocked
• Call for technical
assistence
Machine swift 35
type FM1 FM1C
Theoretical surface coverage 50-70 50-70 m2/h
Working width 35 35 cm
Tools 1x35 1x35 cm
Power supply cord length 15 15 m
Rated voltage 230-240V~ 120V~ AC
Frequency 50 60 Hz
Rated power 700 700 W
Machine weight for operation 39 39 kg
Tank 11 11 l
Brush rpm 810 970 min-1
Brush pressure 11 11 kg
Dimensions (L x W x H) 71x42x51 71x42x51 cm
Assessed sound level LPA according
to EN 60704-1
<70 <70 dB(A)
The assessed effective acceleration
value according to ISO 5349
<0.5 <0.5 m /s2
Splash water protection IPX4 IPX4
Electrical protection class I I
Nr. Article FM1/FM1C/
FM1N/
FM1O
8505450 Edge cleaning tool X
8505010 Hand brush set for shampooing X
To Previous Page
Loading...
