64
Cleaning the machine
Storing / parking the machine (not in operation)
Service, maintenance and care
The maintenance of the machine is a prerequisite for impec-
cable operation and a long service life.
Service intervals
TASKI machines are high-quality machines that have been
checked for safety in the factory and by authorized inspectors.
Electrical and mechanical parts are subject to wear and aging
after a longer period of use.
Service center
Please always indicate the type and number of the machine
whenever you contact us for order placing or in case of mal-
functions.
The required data are provided on the nameplate of your ma-
chine. The address of your closest TASKI service partner is
provided on the last page of these instructions of use.
Attention:
Never clean the machine with a high-pres-
sure cleaner or water jet.
Water ingress in the machine may cause
considerable damage to the mechanical or
electrical parts.
• Wipe the machine with a moist cloth.
Notice:
Wind up the main cord loosely.
Attention:
Use original TASKI parts only; otherwise,
any warranty and liability claims will ex-
pire.
Signs and symbols:
◊ = whenever cleaning is completed, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service lamp
Activity
◊
◊◊
◊◊◊
⊗
Page
Check/replace dust bag ● 63
Clean/replace filter cloth ● 63
Check/replace filter disc ● 63
Check/replace exhaust filter ● 63
Check/replace HEPA filter ● 63
Clean the machine with a moist cloth ●
• In order to maintain operational safety and readiness for
use, the machine must be serviced after 500 working hours
or at least once a year.
Notice:
In case of extraordinary use and/or insuffi-
cient maintenance, shorter intervals are
required.
To Next Page
Loading...
Need help?
General
