Tasman Palermo cot - Converting Your Cot into a Toddler; Junior Bed

Loosen base con-
necting botls approx
3 mm
Loosen base con-
necting botls approx
3 mm
Re-tighten all bolts after removing the front panel
1
2
Converting your cot into a Toddler / Junior Bed
To convert the Palermo into a toddler bed the base must be in the low position
To convert the Palermo into a child’s sofa either base position can be used
To convert the Palermo cot into a Junior bed / Toddler bed / childs sofa remove the front panel
Loosen the 4 x base connector bolts by approx 3 mm to allow the headboards to spread slightly when removing
the front panel
Remove the 4 x front panel connecting bolts and remove the front panel
Re-tighten the 4 x base connecting bolts
5
Palermo Chest and Rascali change table