TATRA PC-10 - Possible Malfunctions; Warranty Obligations; Гарантийный Талон

5
Code:
Name and model of the product:
Seller name and address:
Serial number:
Date of sale:
(seller’s signature and stamp)
ГАРАНТИЙНЫЙ ТАЛОН
Ocial site: tatraline.com
AUTOMATIC PUMP CONTROL
POSSIBLE MALFUNCTIONS
MALFUNCTION POSSIBLE FAILURE OF THE CIRCUIT BREAKER OTHER POSSIBLE CAUSES
The pump does not
start
Electronic circuit board is damaged. No pressure
The Pump is blocked
Cables are crossed (network/pump)
The pump does not
turn o
Electronic circuit board is damaged.
Flow sensor is blocked in the upper posion.
Reset buon is blocked.
The pump does not provide enough pres-
sure.
The presence of leakage, which
exceeds the minimum ow
of 0.6 l/min.
The pump is operat-
ing intermiently
Electronic circuit board is damaged.
The pump does not provide enough pres-
sure.
Presence of leakage
The manufacturer bears warranty obligations during 1 year from the date of sale of the product through
the retail network to the end user. During the warranty period, the manufacturer eliminates defects caused
by their fault charge-free. The warranty does not provide for compensation for damage resulting from
improper installation or operation.
1. Occurrence of malfunctions as a result of non-compliance with the requirements of this guide on
installation and operation, including when the power supply parameters exceed the limits that are set out
in this guide.
2. Presence of traces of mechanical, chemical, thermal damage caused by external influence.
3. Presence of one or more of the following circumstances: mechanical damage to the electronic circuit
board or its elements; damage (burnout) of conductive paths on the board; presence of conductive dust
or other debris on the board; presence of traces of moisture, condensate on the board; malfunctions due
to presence of aggressive chemical impurities in the liquid pumped; violation of an integrity of the body
frame as a result of freezing; pressurization leakage due to installation of the product; malfunction due to
pollution; malfunction as a result of temperature deformation.
4. Presence of signs of unauthorized repair or modification of the product.
WARRANTY OBLIGATIONS
WARRANTY OBLIGATIONS ARE CONSIDERED NULL IN CASE:
The warranty is not valid unless presented with warranty certificate filled out.
To perform diagnostics and repair actions it is necessary to contact the seller.
PC-10 PC-10A