To Next PageTo Next Page
Need help?Do you have a question about the tatsuno OCEAN TOWER Series and is the answer not in the manual?
Essential instruction to read the manual before installation and operation.
Defines the intended applications and media for TATSUNO EUROPE dispensers.
Covers essential health, safety, and personal protective equipment guidelines.
General overview of dispenser features, construction, and electronic counters.
Details technical specifications for various fuel dispenser types.
Explains the marking method and codes for identifying dispenser models.
Introduces classifications and lists standard dispenser models by features.
Details standard SHARK JUNIOR dispenser models and their configurations.
Details standard OCEAN EURO dispenser models and their configurations.
Details standard OCEAN TOWER dispenser models and their configurations.
Explains data on nameplates for metrology and safety compliance.
Critical safety measures to be followed during dispenser installation.
Recommendations for optimal and safe dispenser placement at fuel stations.
Addresses installation in hazardous areas and defines danger zones (ATEX).
Specifies maximum distances from storage tanks and suction height limits.
Outlines electrical connection requirements, including grounding and wiring.
Details the power supply for pump and vacuum motors.
Details the installation of the stop button for safety circuits.
Explains how to control dispenser parameters using the PDEX5 counter.
Details the keys and operation of the PDERT-5O remote controller.
Explains how managers can view and change dispenser operating parameters.
Shows a history of the last 100 error messages for troubleshooting.
Details settings and functions for the TBELTM electronic counter.
Details settings and functions for the TBELTX electronic counter.
Guides on setting fuel prices manually via the counter.
General safety precautions for operating fuel dispensers.
Steps for initial setup and powering on the dispenser.
Specific procedure for commissioning CNG dispensers, including zero-point setting.
Guides on how to operate the dispenser for various fuel types.
Instructions for delivering petrol, diesel, WSE, and AdBlue®.
Procedures for delivering LPG with attendants and unattended.
Steps for starting and terminating CNG delivery to vehicles.
Explains the manual and automatic operating modes of the dispenser.
General guidelines for maintaining dispenser cleanliness and functionality.
Recommends procedures for cleaning painted and stainless steel dispenser covers.
Covers mechanical and electronic calibration of dispenser meters.
Provides guidance on identifying and resolving common dispenser problems.
Lists and explains error messages and their removal methods.
General guidelines for performing service work on dispensers.
General