Tatu Marchesan PSH3 - User Manual

Critical safety and operational warnings for equipment owners.

Details on nameplate information for identification and technical assistance.

Advice on proper disposal of waste and protecting the environment.

Essential safety precautions for operating the seeder safely.

Explains the purpose and importance of safety stickers on the equipment.

Describes the helical channeled rotors used for seed distribution.

Details the standard components like double disc-openers and press wheels.

Instructions for semi-assembled seeders, focusing on drag chain installation.

Step-by-step guide on how to properly attach the seeder to the tractor.

How to position the seeder correctly for safe transport.

Detailed steps and tables for adjusting row unit spacing on the seeder.

Comprehensive tables showing possible row unit spacings for different chassis models.

Pre-seeding checks including lubrication and general inspection.

How to adjust the seed metering box for different grain sizes.

Table showing approximate seed amounts per hectare for wheat.

Table showing approximate seed amounts per hectare for rice.

Explanation of the fertilizer distribution system and dosage adjustments.

Tables for fertilizer distribution based on spacing and gear combinations.

Guide for performing on-ground tests to calibrate seed and fertilizer distribution.

Formula and example for calculating seed/fertilizer distribution for custom areas.

Information on using the hectare counter to measure seeded area.

How disc openers create furrows and how seeds are covered.

Adjusting the seeding depth using the crank handle and spring rods.

Details on how fertilizer is deposited with the openers.

Key operational considerations and best practices for seeding.

Instructions for assembling the optional hopper for fine seeds.

How to adjust the amount of seeds using the adjusting knob and scales.

Description of the single-disc opener and drag chain component.

Introduction to the electronic hectarimeter for measuring seeded areas.

General guidelines and types of lubricants for equipment maintenance.

Specific lubrication points for the seeder at 20-hour intervals.

Specific lubrication points for the seeder at 30-hour intervals.

Steps for cleaning the fertilizer and seed hoppers.

Procedures for maintaining the fertilizer distribution system.

General tasks for maintaining the overall seeder.