EasyManua.ls Logo

Tatung THWP-30 - Troubleshooting; Common Issues and Solutions; Overheat Protection; Important Safety Caution

Tatung THWP-30
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
E L E C T R I C H O T W A T E R D I S P E N S E R
Don't know what this is
The water may not be properly filtered
and may contain too much mineral
which will stick to the inner pot surface
if the container is placed on a plastic surface, the smell from the plastic may
transfer into the water
Open and close the lid
The dispense function may be locked
Water may be filled over the water mark
Power plug may be loose or not plugged in
Check to make sure the power cord is
plugged in correctly
Container is extremely
hot during use
Dispense function is
not working
Dispense function is
not working after
boiling
Bad odor after boiling
the inside container
Automatic shut off feature: If the inner pot is out of water, the overheat protection function will turn on and
turn off the unit automatically to prevent damage and overheating.