To Next Page
S
Susan HaleyAug 17, 2025
Why does my TAUBIK Bicycle show Error 3?
- Hheather65Aug 18, 2025
If your TAUBIK Bicycle displays Error 3, it indicates an overvoltage protection issue. To resolve this, examine the battery voltage.
Why does my TAUBIK Bicycle show Error 3?
If your TAUBIK Bicycle displays Error 3, it indicates an overvoltage protection issue. To resolve this, examine the battery voltage.
What to do if my TAUBIK SOHO 2.0 displays Error 12?
If your TAUBIK Bicycle shows Error 12, it signals a communication failure. You should check the connector to the controller.
What does Error 8 mean on my TAUBIK SOHO 2.0?
If your TAUBIK Bicycle displays Error 8, this indicates a failure related to the battery's temperature. You should check the battery.
What does Error 11 mean on a TAUBIK SOHO 2.0 Bicycle?
If your TAUBIK Bicycle shows Error 11, it means there's a failure in BMS communication. Replacing the battery is recommended.
What causes Error 9 on my TAUBIK SOHO 2.0 and how to fix it?
If your TAUBIK Bicycle displays Error 9, it means the controller temperature is too high, reaching the protection point. Inspect the motor.
How to troubleshoot Error 2 on a TAUBIK Bicycle?
If your TAUBIK Bicycle displays Error 2, it indicates a throttle failure. You should check the throttle.
What to do if TAUBIK SOHO 2.0 Bicycle shows Error 10?
If your TAUBIK Bicycle displays Error 10, it indicates a failure of the speed sensor. Check the installation position of the speed sensor.
What does Error 6 on my TAUBIK SOHO 2.0 Bicycle mean?
If your TAUBIK Bicycle displays Error 6, it indicates a failure of the motor's temperature sensor. You should check the controller.
What does error 7 mean on TAUBIK Bicycle?
If your TAUBIK Bicycle displays Error 7, it indicates a failure of the current sensor. Check the controller.
What does Error 4 mean on my TAUBIK SOHO 2.0 Bicycle and how can I fix it?
If your TAUBIK Bicycle displays Error 4, it indicates a failure of the motor's hall signal wire. You should check the motor.
Controls the E-bike display's power state.
Adjusts the Pedal Assist System (PAS) level.
Changes speed units between MPH and KPH.
Cycles through trip data displays (ODO, Trip, etc.).
Activates low-speed walking assistance mode.
Controls the front headlight power.
Safety guidelines for using the kickstand.
Initial use and familiarization advice for the E-bike.
Explanation of the 5-gear system and its usage.
General
