Power stage efficiency: 200Watt
Power output selector: 90W, 40W, 20W, 12W
Speakers impedance auto detection: 4,8 and 16ohm
Tubes: 12AX72
Channels: CLEAN+CRUNCH and LEAD
Footswitches: CLEAN, CRUNCH, DRIVE, REVERB, BOOST
CHANNEL controls (CLEAN & LEAD):
GAIN, BASS, MIDDLE, MID-RANGE switch, TREBLE, PRESENCE,
VOLUME
MASTER controls:
SERVO – analog enhancer level with SERVO GAIN switch
BOOST - access to set two different volume levels
REVERB
NOISE GATE
INPUT GAIN boost (switch +6dB)
MUTE
RESONANCE – switch increasing the sound in the resonance range of the
loudspeaker
Serial EFFECT LOOP
LINE OUTPUT with Speaker Simulation. Allows send linear signal with
simulation (PIN) or without simulation (RING) or both simultaneously
EXTERNAL CONTROLLER INPUT for channel selector and BOOST
Voltage selector 230V/50Hz or 115V/60Hz
Dimensions: (H x W x D) 90 x 330 x 205 mm
Weight: 2,65kg
Specifications
Made in Poland
To Next Page
Loading...