- Connect the appliance to the mains.
- Turn the appliance on, by pressing the speed
1 button.
- If desire more power, press the speed 2 button.
- Press and hold the button to chop the food.
Release the button to stop the function. (Fig.3).
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Unplug the appliance from the mains.
- Remove the motor unit and cover ¡.
- Carefully remove blades while pulling straight
up. (Fig.4).
- Clean the appliance.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- During the cleaning process, take special care
with the blades, as they are very sharp.
- It is advisable to clean the appliance regularly
and remove any food remains.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance’s
useful life and could become unsafe to use.
- Neither parts of this appliance are suitable for
cleaning in the dishwasher.
- Clean the bowl, baldes and cover under the
running water with a few drops of soap. For the
motor unit use a damp cloth.
- Then dry all parts before its assembly and
storage.
To Next Page
Loading...
Need help?
General