Welding and cutting on sealed gas tanks will cause explosions. These
operations are prohibited.
Welding and cutting areas must be provided with adequate fire extinguishing
equipment. Regular testing for efficiency of this equipment is compulsory as
is training of staff in the use of the equipment.
Once the welding/cutting operation is completed, check for any high
temperature spark or metal which might cause a fire and immediately
dispose of it. If necessary, employ the assistance of a firefighter.
Electric shock can cause serious injury or even death to the
individual when contact is made with live wires. Humid conditions
can add to the risk and great care should be taken when welding or
cutting machines are used in these conditions.
Reliable grounding of machine and work piece as well as a secure ground
clamp, is important.
Insulation layers of electric wires and cables must be checked regularly for
wear and replaced if necessary.
All equipment used and clothing worn during the welding/cutting operation
should be free from moist and kept dry.
Do not make direct body contact with any live electrical parts.
Wearing rubber-insulated shoes and standing on an insulated platform
greatly reduce the risk of accidental shock.
Refrain from replacing the ground cable on the machine with wires not
suitable for the task.
The machine operates on high voltage and capacitors remain charged even
after power is switched off. Removing covers for maintenance procedures
must only be executed by qualified professionals.
Effects of Electromagnetic Fields
Electric current flowing through a conductor produces magnetic
fields (EMF). The discussion on the topic of the effects of EMF on
the human body is ongoing worldwide and up to the present no
evidence has been forthcoming proving negative effects on health.
However, it would be wise to limit exposure to EMF as far as
To Next Page
Loading...