cically designed. The use of any other battery/ies s can cause an
explosion or re hazard.
DESCRIPTION
A Blades/Head
B Appliance body
C On/off switch
D Pilot light
E Guide comb measurements (2-6mm)
F Charger Base
G Battery charger
H Lubricating oil
I Cleaning brush
If the model of your appliance does not have the accessories
described above, they can also be bought separately from the Tech-
nical Assistance Service.
CHARGING THE BATTERY:
- Caution: a new battery is not fully charged and must therefore be
charged before the appliance is used for the rst time.
- Charge the battery at an atmospheric temperature of between 4
and 40ºC.
- Connect the charger to the jack using the socket on the appliance.
The socket is located at the lower/back part of the appliance.
- Plug the charger into the mains.
- The pilot light (D) will come on to indicated that the charger is
charging the battery.
- Approximately 8 hours are needed for a complete charger of the
battery. Never attempt to overcharge the battery (although it is
recommended that the rst charge of the battery be of 12 to 14
hours in duration).
- When the battery is charged disconnect the charger from the
mains supply.
- NB: Do not use the appliance while it is connected to the charger.
- NB: For a long battery life, it is advisable to charge the battery, only
when it has run out completely.
To Next Page
Loading...
Need help?
General
