Need help?Do you have a question about the Taurus Titanium BT-SM 2534 DUAL and is the answer not in the manual?
Essential safety actions and precautions for blade handling and operation.
Guidelines for routine maintenance and reporting equipment faults.
Procedures and best practices for safe and effective operation of the saw.
Important operational advice and safety checks for the mitre saw.
Setup requirements and general checks before operating the saw.
Step-by-step guide for assembling and setting up the sliding mitre saw.
How to precisely adjust the saw for a 90-degree straight cut.
How to precisely adjust the saw for a 45-degree bevel cut.
Instructions for adjusting the bevel angle of the machine head.
Guide on how to adjust or remove the fence for different cuts.
Instructions for performing a 90-degree straight cut with the saw.
Guide for making mitre cuts at various angles to the fence.
Instructions for making bevel cuts to the left or right of 0-45 degrees.
How to perform compound mitre cuts combining bevel and mitre angles.
How to adjust the saw to limit the cutting depth.
Information on using and emptying the sawdust collection bag.
Step-by-step guide for safely changing the saw blade.
Instructions on how to safely transport the sliding mitre saw.
How to use the laser guide for precise cutting.
Explanation of the electric brake system and its operation.
Procedures for cleaning the mitre saw and its components.
Information regarding carbon brush inspection and replacement.
Notes on internal servicing requirements of the equipment.
Details on how to order replacement parts for the saw.
To Next Page
General