Taurus TROPICANO UP & DOWN

Need help?

Do you have a question about the Taurus TROPICANO UP & DOWN and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

The device presented in the manual is a portable fan heater, model TROPICANO UP & DOWN, manufactured by Taurus ALPATEC. It is designed for heating spaces and offers various operational features for user convenience and safety.

Function Description:

The fan heater features a functional knob (A) and a thermostat control knob (B) for adjusting its operation. It includes a diffusing grille (C) through which air is expelled, and a pilot light (D) that indicates when the device is active. For stability, it is equipped with a foot (E), and a transport handle (F) on the top for easy portability.

Important Technical Specifications:

While specific power ratings or voltage requirements are not explicitly detailed in the provided snippets, the manual emphasizes several operational and safety aspects that imply certain technical characteristics. The device is designed to operate with an on/off switch (likely integrated into the functional knob) and a thermostat for temperature regulation. The thermostat allows users to set a desired temperature, and the device will automatically turn on and off to maintain it. The pilot light (D) illuminates when the heating elements are working, indicating active heating.

The fan heater is equipped with a safety device that protects against overheating. If the appliance overheats, it will automatically switch off. It is recommended to disconnect it from the mains supply and wait approximately 15 minutes before reconnecting. If the machine does not start again, authorized technical assistance should be sought.

Usage Features:

Before first use, it is crucial to ensure all packaging materials have been removed and to read the "Safety advice and warnings" booklet. The device should be placed in a well-ventilated room, and for the first 10 minutes of its first use, a slight smoke or odor may be detected, which is normal and will disappear.

To use the fan heater:

Extend the supply cord completely before plugging it in.
Connect the appliance to the mains.
Guide the appliance to direct the flow of air in the desired direction.
Turn the appliance on by selecting the desired power on the function knob (A).
Turn the thermostat control knob (B) to the desired temperature position.
The pilot light (D) will illuminate when the heating elements are working.
During use, the pilot light turns on and off automatically, indicating that the heating elements are working and maintaining the desired temperature.

The device offers two main operational modes:

Fan Function: Select the fan position on the function knob (A) and check that the thermostat control is set to the maximum. This mode likely circulates air without heating.
Heater Function: Select the desired heating power on the function knob (A) and check that the thermostat control is set to the required temperature.

To finish using the appliance, select the minimum position (MIN) using the thermostat control, then switch off the appliance using the function knob (A), disconnect it from the mains, and allow it to cool.

The fan heater is designed for easy transport, featuring a handle on the upper part of the body (F). It should not be used to dry textiles or for heating animals. It is also cautioned against using it in areas where the temperature could fall below 2°C, or in dusty environments where foreign objects could block the fan grille. The user should never leave the appliance unattended while in use.

Maintenance Features:

Before any cleaning task, the appliance must be disconnected from the mains and allowed to cool.

For cleaning:

Clean the equipment with a damp cloth with a few drops of washing-up liquid and then dry it.
Do not use solvents or products with an acid or base pH, such as bleach or abrasive products, for cleaning the appliance.
Do not let water or any other liquid get into the air vents to avoid damage to the inner parts of the appliance.
Never submerge the appliance in water or any other liquid or place it under running water.
If the appliance is not in good condition of cleanliness, its surface may degrade and negatively affect the duration of the appliance's useful life and could become unsafe to use.

A specific observation is made regarding cleaning after prolonged storage or use as a heater: a small amount of smoke may be produced. This is not important and is due to the heater burning dust deposits which have accumulated on the heating element. This phenomenon can be avoided by cleaning the inside of the appliance beforehand through the grille with a vacuum cleaner or pressurized air.

The manual emphasizes that the appliance should be stored in a clean, dry place when not in use. Any repairs or technical assistance should be handled by authorized personnel.