Taurus ULTIMATE GO - Cleaning the Rotary Brush (Model D**); Supplies and Battery Removal; Product Supplies; Removing Batteries

tting to the left in order to release the brush.
(Fig.6A).
- Remove the brush and clean.
- To reassemble, follow the above instructions
but in reverse.
CLEANING THE ROTARY BRUSH:(D**)
- To remove the brush:
- Turn the rotating button on the side of the
tting to the left in order to release the brush.
(Fig.6B).
- Remove the brush and clean.
- To reassemble, follow the above instructions
but in reverse.
SUPPLIES
- Supplies can be acquired from distributors
and authorised establishments (such as lters,
etc...) for your appliance model.
- Always use original supplies, designed speci-
cally for your appliance model.
- These supplies are available in specialist
shops.
HOW TO REMOVE THE BATTERIES FROM
THE INTERIOR OF THE DEVICE:
- CAUTION: It is important that the batteries are
fully discharged prior to its withdrawal from the
apparatus.
- CAUTION: the appliance must be disconnect-
ed from the supply mains when removing the
batteries.
TO REMOVE THE BATTERIES, ONCE THE
LIFE OF THE APPLIANCE, PROCEED AS
FOLLOWS:
- Open the top shell of the apparatus, removing
previously with the help of a screwdriver xing
screws (Fig.7).
- Safely remove the battery from its housing.