Tavool T06 User Manual

LASER LEVEL(T06)
WELCOME
Thanks for choosing TAVOOL laser level to help your
jobs. This user manual will provide you with valuable
information necessary for the proper care and mainte
nance of your new laser tool.
PLEASE READ ALL OF THE INSTRUCTIONS
BEFORE USING THE LINE LASER
● SAFETY
● SPECIFICATIONS
● PRODUCT DETAILS
● OPERATING
● COMMON QUESTIONS AND ANSWERS
● MAINTENANCE
SAFETY
• Read the Safety Instructions and Manual thoroughly before using
this product.
All users must fully understand and adhere to these instructions.
• While the product is in operation, be careful not to expose your
eyes to the emitting laser beam . Exposure to a laser beam for an
extended time may be hazardous to your eyes.
• Do not stare directly into the beam or view directly with optical
instruments or set up the laser at eye level.
• Do not disassemble the laser tool. There are no user serviceable
parts inside.
• Do not modify the laser in any way. Modifying the tool may result in
hazardous Laser Radiation Exposure.
• Do not operate the laser around children or allow children to
operate the laser.
• An exposure to the beam of a Class 2 laser is considered safe for a
maximum of 0.25 seconds. Eyelid reflexes will normally provide
adequate protection.
SPECIFICATION
PRODUCT OVERVIEW
1.Power key
2.Brightness key
3.TYPE-C charging interface
4.Battery indicator
5.Lock switch
6.1/4″ adapter screw hole
OPERATING
Before using ,please ensure the power is full and make sure Lock
Switch at ‘ ’position.
And please keep the Lock Switch at ‘ ’ position during moving the
laser level or storage it.
CUSTOMER SERVICE:
service@tavool.com
Any problem, question or
concern, please feel free to contact us via email, we always stand behind our
products to offer proper solutions and won’t
let you suffer any loss.
● WARRANTY
- 1 - - 2 -
- 3 -
It is very important!
1, Auto Self-leveling Mode:
Turn Lock Switch at ‘ ’ position, vertical and horizontal laser
- 4 -
2
1
3
4
5
6
Laser Class
Class Ⅱ
Laser Wavelength
630~670nm for Red beam
505~550nm for Green beam
Leveling Accuracy
±1.5mm/5m
Leveling/Compensation Range
4°±1°
Working Distance (Line)
15m for Red beam
30m for Green beam
Operating Time
Red Beam:
First gear: about 13 hours
Forth gear:about 27 hours
Green Beam:
First gear: about 4 hours
Forth gear:about 9 hours
Power Source
3.7V 1000mAh lithium battery
IP Rating
IP54
Operation Temperature Range
-10℃– ＋50℃
Storage Temperature Range
-25℃ – ＋70℃

Tavool T06 Specifications

General

Laser Class	Class II
Self-Leveling Range	± 4°
IP Rating	IP54
Laser Type	Green beam
Leveling Accuracy	±0.2mm/m
Accuracy	±0.2mm/m
Working Range	30m
Battery Type	AA
Operating Temperature	-10°C to 50°C
Weight	1.1 lbs