Need help?Do you have a question about the Tayana VANCOUVER 42 and is the answer not in the manual?
Guides the owner through the essential steps for preparing a new yacht for service and identifying potential issues.
Provides a checklist for inspecting and commissioning the yacht, creating a condition report.
Ensures all required safety equipment, including PFDs and fire extinguishers, is present.
Confirms proper operation of engine, steering, sails, and electronics during a sea trial.
Provides detailed procedures for preparing the yacht for winter storage, including draining systems.
Outlines the steps for preparing the yacht for use after a period of storage or lay-up.
Explains how to set and trim sails for a cutter rig, including reefing and sail trim in various conditions.
Details how to properly tune the mast and rigging for optimal sailing performance and comfort.
Guides the process of tuning sails and mast rake based on sailing conditions and helm feel.
Explains the fuel tankage, filters, and safe fueling practices for the yacht.
Covers the yacht's DC and AC electrical systems, including energy audits, panels, battery management, and wiring.
Introduces the yacht's plumbing and sanitation systems.
Describes the propane system, including tank setup, regulator, and safe operation of the stove.
Provides guidance on hull maintenance, including waxing, gelcoat repair, and blister management.
Covers maintenance of spars, standing and running rigging, and sails.
Covers the maintenance of the auxiliary engine, drive train, and related systems.
Covers the 12-volt DC and 110-volt AC electrical systems and battery maintenance.
Covers the fresh water system, bilge pumps, and sanitation systems.
To Next Page
General