Taylor SampleSizer User Manual

rev. 073119-ind
DATA SUMMARY
SampleSizer 10/25 mL SpeedStir
Taylor part number #6190 #9265
Taylor replacement part
numbers
NA
#6101 1" magnetic stir bar
#9198 sample tube
dimensions 1" dia. x 4 3/4" h 4 5/8" l x 1 3/4" w x 1 5/8" h
weight 4.1 oz. 7.5 oz. (with batteries)
material anodized machined aluminum high-impact polystyrene
power NA
4 AA alkaline batteries
(approx. 300 tests with light on; 400 tests with
light off)
operating temperature range NA
36°F–120°F; 2°C–49°C
revolutions per minute NA 600 after 2 seconds
illumination NA 6 LEDs
seal
submersible
(wipe dry after use)
water-resistant: do not submerge
(wipe dry after use)
instructions for use on product packaging on product packaging
1. Rinse and ll #9198 sample tube with water to
be tested in excess of desired volume.
4. …all excess water will be displaced.
2. Orient SampleSizer for desired test volume:
an arrow indicates the skinny end goes rst for
a 25 mL sample.
5. Tool should touch bottom.
3. Slowly lower the tool into the sample…
6. Carefully remove SampleSizer to avoid
dragging out remaining water. Voilà!
overow
SampleSizer Demo Using #6190

Taylor SampleSizer Specifications

General

Brand	Taylor
Model	SampleSizer
Category	Test Equipment
Language	English