3
To turn the scale on, press the button marked “ON/OFF”. The
display will rst show “8888 ” followed by “0.0” (oz) or “0” (g).
Press “ON/OFF” to manually turn the scale off. The scale will
also automatically turn off after approximately 2 minutes
of nonuse.
Your scale is set at the factory to weigh in pounds/ounces.
Press the “LB/KG” to switch to kilogram/gram units of
measurement. (The scale will reset to pounds/ounces when
it is turned off.)
To Turn the Scale On and Off
To Change Units of Measurement
When the display shows zero, it is ready to weigh an
object. Multiple objects can be placed on the platform, up
to the scale’s weight capacity. The display will show the
total weight of all objects on the platform. When one of the
objects is removed from the platform, the weight of the
remaining items will continue to display.
Overload Warning: Should “Err” appear on the display
during a weighing, remove the weight immediately;
otherwise, permanent damage could occur.
Weighing Operation
To Next Page
Loading...
Need help?
General
