Tazz 35310 User Manual

24 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

ENGLISH

GAS/OIL

RATIO

50:1

Get parts or technical assistance online at

www.tazzoutdoorproducts.com or call (800) 345-6007

© 2020 Ardisam

All Rights Reserved

P/N: 35320

ECN: 12633

REV 1: 11/13/2019

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

SERIAL NO.

DATE OF PURCHASE:

Owner’s Manual

79cc Compact Tiller Cultivator

Model #:

35310

Questions and Answers:

E
Erik WilliamsJul 28, 2025
What to do if my Tazz 35310 Tiller engine misses or lacks power?
- J
  john39Jul 28, 2025
  If your Tazz Tiller engine misses or lacks power, try the following: * Raise the drag stake for shallower tilling. * Clean or replace the air cleaner. * Replace the spark plug and adjust the gap. * Drain and refill the gas tank with fresh gasoline. * Remove and replace the fuel filter between the hose and carburetor. If the issue persists, the carburetor may need adjustment by an authorized engine service center.
C
Charles FordAug 4, 2025
What to do if Tazz Tiller moves forward during starting?
- C
  Catherine OsborneAug 4, 2025
  If the Tazz Tiller moves forward during starting, ensure that the drive safety control lever is released to neutral. Also, check the belt tension.
R
Rachel SullivanAug 11, 2025
How to fix belts squeal in forward operation of Tazz 35310?
- A
  Alison MaldonadoAug 11, 2025
  If you hear belts squealing in forward operation of your Tazz Tiller, you can try the following: * Adjust the belt tension using the engagement cable. * If the squealing persists, consider replacing the drive belt.
J
Jodi StewartAug 19, 2025
What to do if Tazz Tiller engine runs rough, floods during operation?
- R
  Rebecca CollinsAug 20, 2025
  If your Tazz Tiller engine runs rough and floods during operation, the air cleaner may be the problem. Try cleaning or replacing the air cleaner.

Tazz 35310 Specifications

General

Brand	Tazz
Model	35310
Category	Tiller
Language	English

Summary

Safety Warnings and Precautions

Owner's Responsibility and Key Warnings

General Safety Rules and Engine Precautions

General Operating Safety Rules

Rules for safe operation, including clothing, footing, and area clearance.

Engine Safety and CO Poisoning Prevention

Precautions for engine operation and preventing carbon monoxide hazards.

Hazard Warnings and Safe Practices

Carbon Monoxide and Engine Modification Hazards

Warnings about CO gas and risks of altering the engine.

Safe Handling of Gasoline

Guidelines for safe refueling and fuel storage to prevent fires.

Operation Controls and Procedures

Control Lever Functions

Starting and Operating Safely

Steps for starting the tiller and essential safety actions during use.

Maintenance, Safety Decals, and Hazard Symbols

Maintenance and Storage Overview

Safety Decals and Symbols Explained

Unpacking and Initial Assembly

Pre-Operation Checks and Adjustments

Engine Oil and Fuel Filling

Instructions for checking and filling engine oil and fuel.

Belt Tension and Drag Stake Adjustment

How to adjust belt tension and set the tilling depth with the drag stake.

Pre-Start Inspection and Cold Starts

Pre-Start Inspection Checklist

Essential checks before starting the engine.

Cold Engine Start-Up Procedure

Operating Procedures and Maintenance Schedule

Restarting Warm Engines and Operating Speed

Shutting Down and Tilling Process

How to safely stop the engine and initiate tilling.

Maintenance Schedule Overview

Belt Maintenance and Replacement

Checking Drive Belt Tension

How to check and adjust the tension of the drive belt.

Changing the Drive Belt

Engine Maintenance and Lubrication

Engine Oil Level Check and Change

Procedures for checking and changing the engine oil.

Troubleshooting and Repair Guide

Common Tiller Problems and Solutions

A guide to diagnosing and fixing common issues with the tiller.