RaLights By TBI Pro
16
ON THE WALL
WARNING
Ensure the area where the light is being attached is free
from wires, plumbing or other obstructions.
If using a ladder, ensure the footing is secure before
climbing and obtain assistance when needed.
Ensure that the location where the light will be
installed allows for adequate sunlight throughout
the day to charge the battery sufficiently. Be
mindful of overhangs or shaded areas.
Prior to wall mounting the
light, hold the light at various
heights and ensure it covers
the area that is desired to
be illuminated. The diagram
below shows generally where
the center of the light will hit
the ground at various heights.
ground 8.5’
8’
7’
6’
10’ 11.5’
wall
To Next Page
Loading...