TBS CROSSFIRE Diversity RX

To Next Page



TBS CROSSFIRE R/C System Revision 2019-03-24

Adaptive Long Range Remote Control System



The TBS CROSSFIRE (XF) system is a R/C link system made for FPV enthusiasts. It features unheard of range

without sacrificing basic functionality such as being immune to interference from onboard equipment, low

latency control or two-way communications including telemetry functionality.

Key features

• Long range, adaptive and robust remote control system for your aircraft

• Immune to on-board noise

• Two-way communication link with real-time link vitals and telemetry

• Self-healing frequency hopping link

• Receiver beacon mode to recover your downed aircraft

• Super easy binding and configuration via built-in OLED display, OpenTX LUA or TBS TANGO remote

• Low latency control for perfect immersive feeling

• Free output mappable 8 output diversity with integrated backup battery or super tiny receiver ( 4g

weight only ) both with up to 12 channel PPM

• Ability to fly with multiple friends at the same time (10 or more)

• Dynamic self-selecting or selectable RF power from 10mW to 2W (local restrictions apply)

• Dedicated head-tracking input option for full FPV immersion

• Transmitter LED shows link health, OLED display for built in configuration

• Expansion port for future feature support 



1



Need help?

Do you have a question about the TBS CROSSFIRE Diversity RX and is the answer not in the manual?

Summary

Specifications

Introduction and Overview

Attention and Regulations

Warnings about local RF legislation and aircraft control regulations.

Drone Racing Environment

Use of Racing Spec Firmware for managing power output in drone racing.

Crossfire LED Color Coding

Explains LED color indicators for power output status and compliance.

System Overview

Details features and ports of transmitter and receiver modules.

Setup and Installation

Connecting System Components

Guides for connecting transmitters, receivers, and antennas.

Binding and Failsafe

Procedures for binding devices and configuring failsafe settings.

Advanced Connections

BST connectivity, SmartAudio VTX control, and serial/MAVLink setups.

Operation and Features

Status Monitoring and Indicators

Understanding link status, signal strength, and LED indicators.

Find Mode and Recovery

Locating downed aircraft using Find Mode and search procedures.

Real-time Telemetry

Using wireless telemetry with handheld devices and apps.

Configuration and Settings

Transmitter Configuration

Configuring transmitter menus, receiver output mapping, and channel settings.

Communication Protocols

Setting up Serial Bridge, MAVLink, DSMX, and CRSF protocols.

RF and Power Management

Adjusting transmission power, frequency, dynamic power, and operating modes.

VTX and Telemetry Integration

Configuring MyVTX settings and integrating telemetry data.

System Updates and Support

Firmware Upgrades and Management

Managing TBS Tango, upgrading firmware with TBS Agent, and emergency updates.

Troubleshooting and Best Practices

Addressing common questions, known issues, and recommended flying practices.