4.4.2. DVBLast
Installation DVBlast , run command “# su yum install dvblast”or “# sudo apt-get
install dvblast”, installation will have difference with different Linux OS.
For more detailed installation steps, please check this link:
https://github.com/gfto/dvblast/blob/master/INSTALL
Scan signals from DVB-S2/S:
dvblast scan dvbs:
# dvblast –f 12538000 –s 41250000 –v 13 –n 1 –a 0
Dvblast scan dvbs2:
# dvblast –f 12660000 –s 45000000 –v 18 –m psk_8 –n 1-a 1
-f: frequency
-s: symbol rate
-v 13, -v 18: LNB voltage. –v 13 for pol.V TP; -v 18:for pol. H TP.
-n 1:frontend 1. Scanning satellite signals, must call frontend 1.
-a xx : Specify the exact adapter
Scan Signals from DVBT/T2
# dvblast –f 474000000 –b 8 -5 DVBT –a 2
# dvblast –f 650000000 –b 8 -5 DVBT2 –a 3
-f: frequency
-b: bandwidth
-5 DVBT, -5 DVBT2: Specify DVB mode
-a xx: Specify the exact adapter
To Next Page
Loading...