TC Electronic IMPULSE IR LOADER

Need help?

Do you have a question about the TC Electronic IMPULSE IR LOADER and is the answer not in the manual?

Summary

Quick Start Guide IMPULSE IR LOADER

Device Controls Overview

Level Knob

Adjusts the output level.

Navigation Buttons

Move forward/backward through IR list. Press both to enter/exit global EQ.

Footswitch Operation

Switch between A/B and BYPASS modes, or toggle IRs/bypass.

USB Connectivity

Connect to computer for IR management and firmware updates.

Power Input

Connect a 9V / >100mA power supply.

A;B Mode Details

Currently Selected IR

Displays the currently selected Impulse Response.

IR Load Count

Shows the total number of IRs loaded into the IMPULSE.

Clipping Indicators

Shows input and output clipping status in A/B and Bypass Modes.

A;B Selection Status

Indicates whether IR A or B is currently selected.

EQ Active Indicator

Shows when the global EQ is active.

Loading Your Own IRs

Supported IR Formats

Lists supported IR file formats: .wav, 16/24/32-bit fixed (PCM), 32-bit float.

Supported Sample Rates

Lists supported audio sample rates: 44.1 kHz, 48 kHz, 96 kHz.

Federal Communications Commission Compliance

FCC Part 15 Compliance

Equipment complies with FCC Rules Part 15, subject to two conditions.

Interference Correction Measures

User-guided steps to correct radio or television reception interference.

CE Compliance Information

Product compliance with EU directives and regulations.