TC Electronic LEVEL PILOT X User Manual

Quick Start Guide
LEVEL PILOT X
Desktop Speaker Volume Controller with XLR Connectivity
DAW analog outputs
DAW
Active speakers
(EN)
When connecting from a DAW with balanced outputs on ¼" jacks, use the following type of cable:
When connecting from a DAW with unbalanced outputs on ¼" jacks, use the following type of cable:
When connecting to monitors with balanced inputs on ¼" jacks, use the following type of cable:
When connecting to monitors with unbalanced inputs on ¼" jacks, use the following type of cable:
From DAW Male XLR Volume 1 in female XLR plug
From DAW Male XLR
To speakerFemale XLR
Female XLR
Volume 1 out
male XLR plug
To speakerVolume 1 out
male XLR plug
Volume 1 in female XLR plug
V 1.0

TC Electronic LEVEL PILOT X Specifications

General

Input Connectors	2 x XLR, 2 x 1/4" TRS
Dynamic Range	>120 dB
Channels	2 (Stereo)
Type	Desktop Volume Controller
Output Connectors	2 x XLR, 2 x 1/4" TRS
Frequency Response	20 Hz - 20 kHz
Input Impedance	10 kΩ
Output Impedance	100 Ohm
Power Supply	Passive (No Power Required)
Weight	0.5 lbs
Attenuation Range	-inf to 0dB

Summary

Quick Start Guide

Connection Scenarios

Details various audio connection types for DAW and monitor integration.

Specifications

Connectors

Details input, output, and cable connector types.

Physical Attributes

Describes the product's physical characteristics, finish, and dimensions.

Legal and Warranty Information

Legal Disclaimer

States limitations of liability for reliance on document information.

Limited Warranty

Provides information on warranty terms and conditions.

Compliance Information

CE Compliance

Declaration of product compliance with EU directives and regulations.