Need help?Do you have a question about the TC Electronic NOVA Modulator NM-1 and is the answer not in the manual?
General| Effects | Chorus, Flanger, Phaser, Tremolo, Vibrato |
|---|---|
| Analog Dry Through | Yes |
| Input Impedance | 1 MΩ |
| Outputs | 2 x 1/4" (Left/Mono, Right) |
| Type | Modulation |
| Output Impedance | 100 Ohm |
| Power Supply | 9V DC |
| Weight | 1.5 lbs |
| Controls | Rate, Depth, Mix, Mode |
| Inputs | 1 x 1/4" (instrument) |
Lists the key features of the Nova Modulator pedal.
Covers power requirements and input/output jack details.
Explains the ON/OFF and TAP TEMPO foot switches.
Covers LFO synchronization and the unit's display indicators.
Explains VARIATION buttons and SPEED LEDs for effect nuance and feedback.
How the Depth knob affects the intensity of the Chorus effect.
Adjusts hi-cut and phase tilt for stereo sound.
Details the Tri-Chorus effect and its Tri-Mix parameter.
Two phase settings for Tri-Chorus for different sounds.
Explains the two operating modes for the Flanger effect.
Controls the intensity of the Flanger modulation.
Controls delay time and provides usage tips for the Flanger.
Controls the intensity and speed of the Phaser effect.
Manages the feedback parameter of the Phaser effect.
Controls the intensity and speed of the Tremolo effect.
Sets the tempo subdivisions for the Tremolo effect.
Controls the intensity and speed of the pitch modulation.
Manages ramp time and high-cut filter for Vibrato.
Activates Vibrato/Ramp and uses TAP TEMPO as a latch.
Explains the capability of using two modulation engines simultaneously.
Details how to synchronize LFO speeds between effect engines.
Procedures for enabling/disabling LFO Sync and its effects.
How to select and alternate between presets and manual settings.
To Next Page