Need help?Do you have a question about the TC Electronic SENTRY and is the answer not in the manual?
General| Type | Noise Gate |
|---|---|
| Bypass Switching | True Bypass |
| Current Draw | 100 mA |
| Controls | Threshold, Decay |
| Inputs | 1 x 1/4" |
| Power Source | 9V DC power supply |
| Weight | 0.3 kg / 0.7 lbs |
| Technology | Digital |
| Outputs | 2 x 1/4" |
Connects to computer for firmware updates and TonePrint editing.
Selects between traditional, TonePrint, or multi-band hard gate.
Adjusts attenuation applied to signal once it falls below the threshold.
Turns the effect on and off.
Connect a 9 V / >100 mA power supply.
Determines level below which gate starts attenuating signal.
Adjusts signal attenuation speed after dropping below threshold.
Details for TC Electronic Sentry Noise Gate, including responsible party and contact.
States equipment tested and found to comply with FCC limits and conditions.
Warns that modifications can void user authority to operate equipment.
Declares product compliance with EU directives and regulations.
To Next Page