Need help?Do you have a question about the TC Electronic INFINITE SAMPLE SUSTAINER and is the answer not in the manual?
Connects to computer or mobile device for TonePrint App and firmware updates.
Illuminates when reverb is active.
Controls the fade out rate of the sustain effect layer.
Controls the fade-in rate of sustain effect layer.
The FX loop sends sustained signal to external effects.
Activates/deactivates sustain layer. Function varies based on LATCH/MOMEN setting.
Connect a standard 9 V / >100 mA power supply.
Controls the output volume of the effect.
Activates the built-in reverb engine.
Selects number of sustain layers or TonePrint slot.
Illuminates when sustain effect is active (red=Latching; green=Momentary).
The FX loop returns sustained signal from external effects.
Selects between latching or momentary footswitch control.
General| Technology | Digital |
|---|---|
| Outputs | 1 |
| Power Supply | 9V DC |
| Current Draw | 100 mA |
| Bypass | True Bypass |
| Input | 1 x 1/4" (instrument) |
| Output | 1 x 1/4" (instrument) |
| Power Source | External power supply (not included) |
To Next Page