30
Filling the water tank
1. Pull the water tank straight up
and out of the machine.
2. Fill the water tank with fresh,
cold tap water or drinking
water up to the MAX mark.
3. Reinsert the water tank into
the machine and push it down
as far as it will go.
Preparing beverages
1. Fold back the lever as far as it
will go and insert a Cafissimo
capsule as illustrated with the
lid facing forwards.
The capsule must be intact:
Do not pierce it and do not
remove the capsule lid or
insert a misshapen capsule!
2. Fold the lever down completely.
This pierces the base and lid
of the inserted capsule.
3. Place an empty cup under-
neath the beverage spout.
4.
Press the button
that corre-
sponds to the capsule you
have inserted:
Espresso,
Caffè crema or
Black coffee.
The brewing process starts and
stops automatically. You will
hear a beep at the end of the
brewing process.
5. Before removing the coffee
cup from the drip grid, fold
back the lever as far as it will
go and then down again.
en
113420 en Cafissimo Pure+ v6.indd 30113420 en Cafissimo Pure+ v6.indd 30 06.01.23 15:1906.01.23 15:19
To Next Page
Loading...
