51
• When the tablet falls into a loop during power on
animation and the user interface can't be accessed,
press and hold the Power key to reset. This eliminates
any abnormal OS booting issues caused by third
party applications.
• If neither method is effective, reset the tablet by
pressing the Power key and the Volume up key at the
same time, selecting a language, and then selecting
Wipe data/Factory reset. Press the Volume key to
select, and press the Power key to confirm each
selection.
My tablet has not responded for several minutes
• If your tablet doesn’t respond, turn off your tablet by
pressing and holding the Power key until it turns off
and then restart it again.
• If your tablet has a removable battery, remove the
battery and reinsert it, then restart the tablet.
• If it still doesn't work, reset the tablet.
My tablet turns off by itself
• Check that your screen is locked when you are not
using your tablet, and make sure that the Power
key is not accidentally pressed while the screen is
unlocked.
• Check the battery charge level.
• If it still doesn't work, reset the tablet or update
software.
To Next Page
Loading...
Need help?
General
