TCL 32DD420 User Manual

EN
8
English
Chapter 3 - Basic TV operations
Accessing channels
Using the numeric buttons: press the corresponding
numeric buttons on the remote control to access the
channels.
Using the P+/- buttons: press the P+/- buttons on
the remote control or the corresponding buttons on
the TV set to scroll through the channels.
Using the LIST button: press the LIST button on
the remote control to display the channel list and
press ▲/▼ to select the channels, then press OK to
confirm.
Watching connected devices
Select connected devices via three ways below:
• Press Menu to display the main menu, press
▲/▼/◄/► to select the input source, then press
OK to enter.
• Press Source to display the Input Source menu,
press ▲/▼ and OK to select the input source.
• You can also press the corresponding buttons on
the TV set to scroll through TV and other input
sources.
Press Source again or Exit to close the menu.
Adjusting Volume
Volume control: press the V+/- buttons on the
remote control or the corresponding buttons on the
TV set to increase or decrease the volume.
Sound mute: press the Mute button to temporarily
mute the sound. Press this button again or the V+
button to restore it.
Using TV settings menu
Allows you to adjust TV settings, such as picture and
sound.
1. Press Menu to display the main menu.
2. Press ▲/▼/◄/► to select Settings and press OK
to display the Settings menu.
3. Press ▲/▼ to select the desired item, then press
OK/► to enter the corresponding submenu.
4. In submenus, press ▲/▼ to select menu options,
then press OK/► to enter the option list, the
adjustment interface, or the corresponding
submenu.
5. Press Return to go back to the previous menu.
6. Press Exit to close the menu.
Note: You can also press the Option button on
the remote control to select Settings and
press OK to enter the Settings menu. Some
options may not be available for certain
signal sources.
Selecting menu language
Allows you to select your preferred menu language.
1. Press Menu to display the main menu.
2. Press ▲/▼/◄/► to select Settings and press
OK, use ▲/▼ to select System, and press OK/►
to enter.
3. Select Menu language and press ▲/▼ to select
your desired language, then press OK to confirm.
4. Press Exit to close the menu.

TCL 32DD420 Specifications

General

Screen shape	Flat
Response time	30 ms
Display diagonal	32 \
Display brightness	240 cd/m²
Display resolution	1366 x 768 pixels
Display technology	LCD
Native aspect ratio	16:9
Native refresh rate	60 Hz
Peak luminance ratio	80 %
LED backlighting type	Direct-LED
Supported video modes	768p
Viewable size diagonal	800 mm
Contrast ratio (typical)	-
Display diagonal (metric)	81.3 cm
Motion interpolation technology	PPI (Picture Performance Index) 100
Dynamic contrast ratio marketing name	Mega Contrast
HDMI version	1.4
PC in (D-Sub)	No
RF connector type	F, IEC
USB 2.0 ports quantity	1
Common interface Plus (CI+)	Yes
Common interface Plus (CI+) version	1.3
Tuner type	Analog & digital
Analog signal format system	NTSC, PAL, SECAM
Digital signal format system	DVB-C, DVB-S2, DVB-T2
Audio formats supported	MP3
Image formats supported	BMP, JPG, PNG
Video formats supported	AVI, MKV, MP4, MPG, OGM, TS
Picture processing technology	TCL Pure Image
Programming period	8 day(s)
Number of OSD languages	30
Firmware upgradeable via	USB
On Screen Display (OSD) languages	ALB, BOS, BUL, CRO, CZE, DAN, DEU, DUT, ENG, ESP, EST, FIN, FRE, GRE, HUN, ITA, LAT, LIT, MAC, NOR, POL, POR, RUM, RUS, SER, SLK, SLV, SWE, TUR, UKR
Cables included	AC
Remote control type	RC300
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Energy efficiency scale	A to G
Power consumption (max)	55 W
Power consumption (standby)	0.22 W
Power consumption (typical)	31 W
Package type	Box
Package depth	126 mm
Package height	512 mm
Package weight	5300 g
Audio decoders	Dolby Digital, Dolby Digital Plus
RMS rated power	10 W
Product color	Black
Mercury content	0 mg
Heavy metals free	Hg (mercury)
Panel mounting interface	100 x 100 mm
Certification	CE
Battery type	AAA
Battery weight	15 g
Battery technology	Alkaline
Truck type	87 cbm
Pallet width	1200 mm
Pallet height	1164 mm
Pallet weight	107900 g
Pallet net weight	12500 g
Quantity per truck	1188 pc(s)
Quantity per pallet	18 pc(s)
Number of pallets per truck	66 pc(s)
Maximum number of stacking cartons	5 pc(s)
Repairability index	6.4

Weight and Dimensions

Stand width	615 mm
Depth (with stand)	175 mm
Height (with stand)	480 mm
Weight (with stand)	4000 g
Depth (without stand)	80 mm
Width (without stand)	732 mm
Height (without stand)	435 mm
Weight (without stand)	3900 g