16
Add the AC Unit to the Wireless Network using “CF Mode”
1. The App and AC unit automatically defaults to CF mode upon start up. Follow the prompts
on the screen and then press “ Next Step” to continue.
Note: If the AC unit is not in CF mode, press Display on the remote 6 times. After 8 to 10 seconds
your will hear two beeps and the AC will display CF.
2. Select the network you wish to connect to, enter the router password and press “Next” to
continue.
Note: If having diculties finding or joining your wireless network you may need to give the TCL
Home Comfort App permission to enable Location. This setting can typically be found by going to
Settings > Apps > TCL Home Comfort and then select to enable Location. The exact location and
method to enable this setting varies by phone OS and version.
To Next Page
Loading...
Need help?
General
