EN
15
English
Using more of your TV
4.
For the rst time, activate the screen mirroring
function on your iPhone, iPad, or Mac and
choose the TV’s name you want to connect in the
searching list.
5.
If an AirPlay passcode appears on your TV screen,
enter the passcode on your iOS or iPadOS device.
6.
To stop mirroring your iOS or iPadOS device, open
Control Center, tap screen mirroring, then tap stop
mirroring.
Notes:
-
If your WiFi is turned o, press on the remote
control, select
Settings >
Network and Internet
> Wi-Fi
,
and press
OK
to turn it on.
-
To disable the feature, select
Settings > System
> AirPlay and HomeKit Settings > Apple
AirPlay and HomeKit > AirPlay
and press
OK
to turn it o.
-
Apple, AirPlay and HomeKit are trademarks
of Apple Inc., registered in the U.S. and other
countries.
-
This Smart TV Pro is compatible with AirPlay
2 and HomeKit. iOS 12.3 or later or macOS
10.14.5 or later is required.
Multi Visual
Allows you to enjoy dierent programmes with your
family on one TV at the same time.
The multi visual function is enabled by default. To use
the function, make sure your phone is Android OS
and the WiFi on the phone is turned on. Then follow
the steps below to operate.
1.
Press on the remote control, select
Settings >
Network and Internet > Wi-Fi
, and press
OK
to
turn it on.
2.
Press on the remote control, select
Multi
Visual
, then select your desired display mode and
press
OK
to enter. Press "
Start now
" to connect.
3.
Activate the cast screen function on your phone
and choose the TV’s name you want to connect in
the searching list.
4.
For the rst time, depending on dierent types of
phones, there are two situations:
- An invitation prompt appears, select
Accept
and
press
OK
to connect.
- Enter a correct PIN code to connect as per the
PIN message on the phone.
5.
To exit the multi visual function, press , then
select
OK
and press
OK
to conrm.
Notes:
-
This feature is not available in any of the cases
below:
• when TV is using Netix or Media Player.
• if the video from phone/DTV is scrambled.
• when the capacity of required video decoding
exceeds 4K 60Hz.
-
When in full screen mode, due to the
compatibility of the third party’s Apps, there might
occur failure to return to the dual views.
-
Multiple phones can be used. When in dual view
mode, use
/
to move the focus to TV view and
then cast another phone to the TV.
-
To check all available history list, press on
the remote control, select
Settings > System
> Multi visual settings > Connection list
and
press
OK
to enter.
Blue Light Filter
It reduces the amount of blue light emitted by
the screen, which can reduce the visual fatigue
associated with screen viewing.
1.
Press on the remote control to display the
dashboard, select
Picture > Advanced Settings >
Colour
and press
OK /
to enter.
2.
Select the Blue Light Filter
option, and press
OK
to
toggle between on or o.
Notes:
-
After watching TV for half an hour, please move
away from the TV and rest your eyes.
-
When resting, please look far away to adjust the
ciliary muscles of the eye to avoid eye strain.
-
Please form a good habit of doing eye exercises
to protect eyesight and prevent myopia.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
