TCL Alcatel Pixi4-5 4G - Page 26

L1 Service Manual TCL Communication Ltd.
Rev.
5045X/D/A/J/G/T/Y Level 1 Service Manual
Page
1.0
26/41
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
well;
VIII. Press “Pass” to continue;
IX. Remove headset according to instruction and press “Pass” to continue.
 USB
I. Insert USB cable according to instruction and it will say “USB: OK”, “Current: xx mA” if it
functions well;
II. Remove USB cable according to instruction and press “Pass” to continue;
 CHARGER
I. Insert charger cable according to instruction, it will detect it and say “Charger: OK. Current:
xx mA” if it functions well;
II. Remove charger cable according to instruction and press “Pass” to continue.
 G-SENSOR
III. Put the handset towards up according to instruction;
IV. Press “Pass” to continue;
V. Put the handset “FACE DOWN”, “DOWN”, “LEFT”, “RIGHT” and “FACE UP” according to
instruction, and then the instruction will disappear if it functions well;
VI. Press “Pass” to continue.
 PROXIMITY SENSOR
I. Please shadow the sensor with your hand and move away, then it will say “near -> far:1”
and “far->near:1” if it functions well;
II. Press “Pass” to continue.
 SIM CARD
I. Insert SIM card and the phone will detect it if it functions well;