To Next Page

To Previous Page

Introduction

Buttons on the TV

Take a certain model for an example:

Take another model for an example:

1. PROGRAM DOWN/UP button

Scans down/up through the channel list. In the menu system, PROGRAM DOWN acts like the down direction

button on the remote and adjusts menu; PROGRAM UP acts like the up direction buttons on the remote and

adjust menu controls.

MENU button

Brings up the menu system

5. POWER button

Turns the TV on or standby. (Note: for some models, the POWER button turns the TV on or off.)

. VOLUME DOWN/UP button

Decreases/increases the volume. In the menu system, they act like the left/right direction buttons on the remote

and adjust menu controls

OK button

VOL

Increases the volume, or scans up through the program.

Note: In all signal sources, press it to increase the volume; while in TV mode,

press first, then press + to scan up through the program when program info appears on the screen.

. - (PROGRAM/VOLUME DOWN) button

Decreases the volume, or scans down through the program.

Note: In all signal sources, press it to decrease the volume; while in TV mode,

press first, then press - to scan down through the program when program info appears on the screen.

4. FUNCTION ( ) button

POWER ( ) button (Note: For some models, the POWER button is not available.)

Press it to pop out program info, or switch to signal source selection.

Note: press at the first time, the TV screen displays program info;

press for the next time when program info appears, switch to signal source selection.

Turns the TV on or standby.

1. + (PROGRAM/VOLUME UP) button

Notes:

The location and names of the function buttons and power button on the TV may vary according to TV model.

TCL LED40S4690 User Manual

Questions and Answers: