TCL LIFE CAM

7
5) When you hear "Ready to congure LIFECAM" from the audio
prompt and the LED ashes red, select “+” in the LIFE App, and
follow the on-screen instrucons to add and congure your
LIFECAM. Once your LIFECAM connects to the Wi-Fi network
successfully, the LED will turn o.
Note: Please reset your LIFECAM If the LED connues to ash, or you hear
"Sorry, adding LIFECAM failed, please try again" from the audio prompt.
Reseng Your LIFECAM
If you want to change the LIFECAM Wi-Fi sengs, or your LIFECAM
connecon fails, please long press the reset buon using the reset
pin for 5 seconds. An audio guide will nofy you if the reset has
succeeded.
Note: Please add your LIFECAM again in the App aer you reset it.