14
Using More of Your TV
3. Press EXIT or
to close the menu.
Note: This function increases standby power
consumption.
Password in Parental Control
- The default password is 1234. You can change it to a
new one.
- The super password is 0423. If you forget your code,
enter the super password to override any existing
codes.
Video FLV, TS, MP4
Notes:
- If Share&See is switched on, the TV will display
the list of available DLNA servers which are
available in local network.
- Content from third-party DLNA servers may not
play correctly on your TV due to compatibility
problems.
- When sharing media les from a PC, certain
features may be unavailable and, due to the le
and encoding formats used, playback issues may
occur.
- Because of network related conditions, playback
of media les may not be error-free. When this
happens, play them from a USB drive.
WiFi Display
(*not available for some models)
WiFi display allows you to share screen and sound
of your device such as a smartphone or a tablet to
your TV, wirelessly (i.e. without cables). This makes
it possible to view on your TV, at the same time, what
your smartphone or tablet is showing. For example, you
can launch a video on your smartphone and display it
simultaneously on your TV, or use your tablet as game
controller with content displayed on the big screen of
your TV.
Whenever you want to use WiFi display, you must rst
activate this function in your TV. To do it follow the steps
below:
1. Press
on the remote control, select Smart TV >
WiFi display and press OK to enter. You will see
details for this function.
2. Find the WiFi display function in your device.
Different devices may have different names for this
function.
3. Then click the “connection” function on the device.
If connected successfully, you will see on your TV
screen what the device is showing.
Note: Does not guarantee that the use of the WiFi
display function will be smooth or error-free
since not all devices are compatible with the
WiFi display function.
Using Instant Power On
It enables you to turn on your TV within 5 seconds from
standby mode.
1. Press
on the remote control, select System >
Instant power on and press OK/► to enter.
2. Press ▲/▼ to select On and press OK/► to conrm.
To Next Page
Loading...
Need help?
General
