5
Your device includes a radio transmitter and
receiver. It is designed and manufactured
not to exceed the exposure limits for
Radio Frequency (RF) set by the Federal
Communications Commission (FCC). The RF
exposure limits set by the FCC for wireless
mobile devices utilize a unit of measurement
referred to as Specific Absorption Rate (SAR),
which is a measure of the amount of RF
energy absorbed by the body when using
a mobile device. The FCC requires mobile
device manufacturers to ensure that their
mobile devices comply with these objective
limits for safe exposure. The FCC SAR
limit incorporates a substantial margin of
safety to give additional protection to the
public and to account for any variations in
measurements. The FCC limit for public
exposure from cellular devices is a SAR level
of 16 watts per kilogram (1.6 W/kg). Tests for
SAR are conducted using standard operating
positions with the mobile device transmitting
at its highest certified power level in all
tested frequency bands.
SAR information for this device can be found
on the FCC website at www.fcc.gov/oet/ea/.
Follow the instructions on the website to use
the FCC ID for this device to find SAR values
for the device.
To view additional SAR information on your
tablet, swipe up from the Home screen >
Settings > System > About tablet > Legal
information > RF Exposure.
SAR
To Next Page
Loading...
Need help?
General
