TCO S 113 - Water, Cleaning, and Electrical Safety; Water and Liquid Safety; Cleaning and Maintenance Safety; Electrical Safety Guidelines

– 3 –
EN
DO NOT put your wireless speaker in
contact with water or other liquids
and dust. NEVER immerse in water.
Water and electronics don’t mix.
DO NOT use liquid, aerosol cleaners,
or solvents on or near your wireless
speaker. Clean only with a so, dry
cloth. Disconnect any cords before
cleaning the wireless speaker.
Safety Informaon
• NEVER place this product on other electrical equipment. Keep your
wireless speaker sources of electrical noise such as uorescent
lamps or motors.
•
To reduce the risk of re or electric shock, wire or connect your speaker
to products only in the manner instructed in the documentaon
supplied herewith. DO NOT aempt to modify or adjust any ports.
Any improper connecons or adjustments may cause damage.
• NEVER remove the casing of this product.
• For all maintenance refer to qualied technicians. Maintenance is
necessary when the wireless speaker has been damaged in any way,
such as liquid has been spilled, the speaker has been exposed to
rain or moisture, does not operate normally, or has been dropped.
• The type plate is located on the boom of the speaker.