Need help?Do you have a question about the Teac CR-H260i and is the answer not in the manual?
Amplifier| output power | 25 W + 25 W (6 Ω, 1 kHz, 0.5%) |
|---|---|
| input sensitivity | 340 mV/47 kΩ |
| frequency response | 20 Hz – 20 kHz |
| compatible speaker impedance range | 6 Ω – 8 Ω |
FM Tuner| tuning range | 87.5 MHz – 108.0 MHz |
|---|---|
| signal-to-noise ratio (mono) | 56 dB |
| signal-to-noise ratio (stereo) | 52 dB |
AM Tuner| tuning range (european model) | 522 kHz – 1, 629 kHz |
|---|---|
| tuning range (north american model) | 530 kHz – 1, 710 kHz |
| signal-to-noise ratio | 35 dB |
CD Player| frequency response | 20 Hz – 20 kHz ± 2.0 dB |
|---|---|
| signal-to-noise ratio | 85 dB or more |
| total harmonic distortion (thd) | 0.05% (1 kHz, 0 dB) |
USB Flash Drive/SD Memory Card| frequency response | 20 Hz – 20 kHz ± 1.0 dB |
|---|---|
| signal-to-noise ratio | 80 dB or more |
Bluetooth| bluetooth version | V2.1+EDR |
|---|---|
| output | Class 2 |
| supported profiles | A2DP, AVRCP |
Playable Files| mp3 format | MPEG-1 Audio Layer 3 |
|---|---|
| mp3 sampling rate | 44.1 or 48 kHz |
| mp3 bit rate | 320 kbps or less |
| wma sampling rate | 44.1 kHz |
| wma bit rate | 192 kbps or less |
General Specifications| power supply (european model) | AC 230 V, 50 Hz |
|---|---|
| power supply (north american model) | AC 120 V, 60 Hz |
| power consumption | 35 W |
| standby power consumption | 0.5 W or less |
| dimensions (w x h x d) | 215 × 105 × 355 mm |
| weight | 3.2 kg |
To Next Page
