Do you have a question about the Teac CR-H227i and is the answer not in the manual?
output power | 25 W/ch |
---|---|
input sensitivity | 400 mV/47 kohms |
frequency response | 20 Hz to 60, 000 Hz (+1/–3 dB) |
FM tuning range | 87.50 MHz to 108.00 MHz (50 kHz steps) |
---|---|
FM signal-to-noise ratio | 65 dB (Mono) / 60 dB (Stereo) |
AM tuning range | 522 kHz to 1629 kHz (9 kHz steps) |
AM signal-to-noise ratio | 35 dB |
frequency response | 20 Hz to 20, 000 Hz (±2 dB) |
---|---|
signal-to-noise ratio | more than 95 dB |
wow and flutter | Unmeasurable |
power requirements | 230 V AC, 50 Hz |
---|---|
power consumption | 75 W |
power consumption (standby) | 1.5 W |
main unit dimensions | 215 x 110 x 359 mm |
dock dimensions | 100 x 40 x 106 mm |
main unit weight | 4.4 kg |
dock weight | 0.4 kg |