Getting
Started
The 05-22 comes
mounted
with
an
adapter for iPod
with
color display
(40GB,
60GB),
"60GB
(color) + Photo 40GB/60GB". To play
your
iPod
through
the
05-22, you have first
to
check
if
the
factory
mounted
adapter fits your model
of
iPod. If it does not, you have
to
replace it
with
a correct one,
as
explained below.
1. Remove the adapter from
the
05-22.
Hold
the
left and right sides
of
the
adapter and
gently
pull it up.
2. Choose the Dock adapter
that
fits your iPod mobile digital device.
"iPod touch" for iPod touch.
"nano" for iPod nano 1
st
and 2nd generations.
"nano
3G"
3G
for iPod nano 3rd generation.
"mini" for iPod mini.
"Video
30GB"
for iPod
with
video (30 GB)and iPod classic
(SO
GB).
"Video
60GB/SOGB"
for iPod
with
video (60
GB,
SO
GB)
and iPod classic (160
GB).
"20GB
(color) + Photo 30GB"
for
iPod
with
color
display
(20GB,
30GB,
U2
Special
Edition).
"60GB
(color) + Photo 40GB/60GB" for iPod
with
color display
(40GB,
60GB).
"20GB
+ U2" for iPod
with
Click Wheel (20
GB,
U2
Special Edition).
"40GB"
for iPod
with
Click Wheel
(40
GB)
.
•
Use
a commercially available adapter
to
play iPod
with
dock
connector
(with four
buttons under the display).
3. Insert
the
adapter into the
05-22.
Fit
the
front
edge
of
the
adapter
into
the
Dock, and
then
press
the
back edge
of
the
adapter
onto
the
Dock
until
a
slight
"click"
is
heard
indicating
the
adapter
is
inserted correctly.
• When you need
to
remove
the
adapter, hold
the
left
and right sides
of
the
adapter and
gently
pull it up.
To Next Page
Loading...
