Stand and wall-mounting instructions (optional)
How to assemble the stand
-Before attaching/detaching the stand, make sure to turn off the TV.
-Before performing work, spread cushioning over the base area to lay the LED TV on.
This will prevent it from being damaged.
Assembling instruction:
If you need to remove or assemble the stand please read the following instructions.
1) Assemble the stand and the unit together with five M4*10 screws. (Figure 1)
- To disconnect the stand from the TV, perform the above steps in reverse order.
8
Introduction
General Description
External Connection
Basic operationMenu system
instruction
Digital Media Player
Troubleshooting
Picture defects and
the reason
Note: Please take precautions to prevent large TVS from falling over and causing
damage and injury, eg anchoring to the wall.
B-M4*10
Figure 1
Screws(M4X10)
To Next Page
Loading...
