Features
1-4
A Variety of Recording Triggers
Manual: Starts recording manually.
Level Trigger: Starts recording by detecting level changes in a specified channel.
External Trigger: Starts recording by using an external signal as the trigger.
Pre-trigger: A pre-trigger can record the data that was read into a
buffer before a recording-startcondition (based on a level trigger or
external trigger) was satisfied.
Post-trigger: Continues to record for a set period even after a recording-stop condition
(based on a level trigger or external trigger) was satisfied.
Interval operation: Repeatedly starts and stops recording for a specified number of times, during a
specified period.
z Event Marks
You can mark data during recording, and search for such event marks when you want to reproduce
some recorded data.
z Recording and Reproducing Voice Memos
A microphone amp and a speaker are built in, so you can record and reproduce (listen to) voice
memos.
To Next Page
Loading...
