Installing LX-10/20 IEEE 1394 Version
2-7
For Windows Me
1. Insert the CBFW3 to the CardBus PC card slot, or insert the PCIFW3, then turning on your PC. You will see
the “Update Device Driver Wizard” dialog box.
Click ［Next］.
2. Clikc ［Finish］.
3. Now you complete the driver software installation.
You can confirm that driver has been installed correctly as follows:
Double click [Control Panel] from [My Computer］ to open the dialog. Then double click ［System］.
Click [Device Manager］, then double click ［1394 Bus Controller］. Confirm “Texas Instruments OHCI
Compliant IEEE 1394 Host Controller” is added to indicate the driver software has been correctly installed.
Now the OHCI driver installation has been completed, next proceed to the LX Series device driver installation
To Next Page
Loading...
Need help?
General
