Teac MC-DX10 - Cleaning and Maintenance; CD Lens Cleaning; Main Unit Cleaning; Headphone Plug Cleaning

MC-DX10
33
2 ADJUSTMENTS AND CHECKS
Use a screwdriver with a plastic or ceramic grip for all adjustment.
2-1 TUNER SECTION
1. Set the function switch to the AM position.
2. Connect the test loop antenna across the output of the signal generator.
3. Connect the oscilloscope to the speaker terminal.
4. Set the signal generator as listed in the alignment chart.
2-1-2 AM adjustment
1. Set the function switch to the FM position.
2. Connect the signal generator output through a 75 ohm dummy
3. Connect the oscilloscope to the speaker terminal.
4. Set the signal generator as listed in the alignment chart.
2-1-1 FM adjustment
antenna to "ANT" on MAIN PCB.
2-2 Adjustment and Test Points
T502
CT501
L501
CT502
T503
CT504
CT503
MC-DX10 TUNER PCB
L502
AM ANT COIL
All manuals and user guides at all-guides.com