Teac MT-20D-IO - Page 10

- How to Display Model Classification -
More
than one model is available according to specifications in the MT-2ST
Series. Sections 3 and 4 of this maintenance manual provide the descrip-
tions in common to all the models, unless otherwise specified. However,
partially there are special descriptions whose application is limited only
to particular models represented by the following symbols:
"90 ips"
"30 ips"
"Permalloy head"
"Ferrite head"
"D/CAS"
"SCSI"
"BASIC"
Applied only to the models in which the tape speed is
90 ips (inch per second) during data write/read opera-
tion.
Applied only to the models in which the tape speed is
30 ips during data write/read operation.
Applied only to a model on which the parmalloy head is
mounted.
Applied only to a model on which a ferrite head is
mounted.
Applied only to the D/CAS interface model.
Applied only to the SCSI interface model.
Applied only to the BASIC interface model.
- viii -