Need help?Do you have a question about the Teac RW-H500 and is the answer not in the manual?
General| Type | CD Recorder |
|---|---|
| Recording Media | CD-R, CD-RW |
| Playback Media | CD, CD-R, CD-RW |
| Audio Formats Supported | CD-DA |
| Frequency Response | 20 Hz - 20 kHz |
| Power Supply | AC 120V, 60Hz |
| Headphone Output | Yes |
| Power Consumption | 18W |
| Signal to Noise Ratio | 90 dB |
| Analog Inputs | 1 x RCA |
| Digital Inputs | Coaxial x 1, Optical x 1 |
| Digital Outputs | Coaxial x 1, Optical x 1 |
| Analog Outputs | RCA x 1 |
Details FCC compliance and laser classification for USA users.
Instructions for safe AC power cord connection in Canada.
General safety advice covering handling, ventilation, voltage, and placement.
Covers detailed safety points on operation, cleaning, and maintenance.
Specific grounding guidelines for CATV system installers.
Explains the characteristics and differences between CD-R and CD-RW discs.
Details the process of finalizing a disc to make it standard CD-compatible.
Proper methods for placing, removing, and holding discs.
Instructions on cleaning discs and avoiding damage from chemicals or environment.
How to connect audio sources and outputs using LINE IN/OUT jacks.
Specific connection steps for AV-H500D amplifier.
Specific connection steps for A-H500 amplifier.
How to connect components using optical cables for digital audio.
Connecting the remote control for system operation and Al direct play.
Instructions for connecting the AC power cord.
How to use the remote control, including range and potential interference.
Instructions for inserting, replacing, and handling batteries for the remote.
Instructions on how to operate the remote control effectively.
Details the functionality of the time counter feature.
How to use MULTI JOG, MUSIC SKIP, and ENTER buttons for navigation.
How to cycle through different playback modes using the PLAY MODE button.
Explains the function of the power standby indicator light.
Steps to load a disc and initiate playback.
How the unit identifies different disc types and their status.
Explains the track calendar, total play time, and other display indicators.
How to stop or temporarily pause playback using STOP and PAUSE buttons.
Instructions for opening the disc tray.
How to navigate between tracks using the MULTI JOG control.
Plays all tracks on the disc repeatedly.
Plays a selected track repeatedly.
Plays tracks in a random order.
How to select program mode and choose tracks for playback.
Covers error handling, track limits, and starting programmed playback.
How to add a desired track to the current program sequence.
How to remove the last track or all tracks from the program.
How to set the unit to play the programmed tracks repeatedly.
Details required media (CD-R/RW) and system limitations for recording.
Explains the rules governing digital copying restrictions.
Steps for connecting the unit and setting up power, input, and disc.
How to adjust recording levels and enable synchronous recording.
Instructions for starting the CD copying process and stopping the recording.
Steps to turn on the unit, load a disc, and select the audio source.
How to start the recording process and enter record pause mode.
How to set the Auto Track function for automatic track numbering.
How to set the recording level to avoid distortion and optimize sound quality.
How to stop or temporarily pause the recording process.
How to use the REC MUTE function to insert silence into the recording.
How to manually divide a recording into separate tracks.
Requirements for performing synchronous recording, including connected equipment.
Steps to start the synchronous recording process from a CD player.
Details the signal and audio level conditions required to start and stop synchronized recording.
How to enable the feature and initiate synchronized recording.
How the unit automatically inserts track divisions based on signals or audio levels.
How to set the sound level for synchronized recording and track division.
How to apply smooth fade-in and fade-out effects to recorded tracks.
How to restrict the number of tracks recorded in a single session.
How to monitor the input signal for levels and preview during recording.
Information about the sampling rate converter and its compatibility with digital signals.
Steps to start the finalization process on a recordable disc.
Using MULTI JOG or ENTER to start finalization and notes on CD-R vs CD-RW compatibility.
Choosing between erasing tracks, refreshing the disc, or unfinalizing it.
Steps to execute the selected erase or unfinalize function.
Shows elapsed/remaining time for current track and total playback time.
Displays total track count and remaining recording time.
Shows elapsed recording time for the current track and remaining disc recording time.
How to select the desired sleep time interval using the MULTI JOG.
How to confirm the selected sleep timer setting.
Messages related to input signal issues and disc problems.
Messages concerning recording issues, SCMS restrictions, and disc full conditions.
Indicates internal unit errors requiring dealer or service center attention.
Solutions for power loss, no sound, noisy sound, and sound skipping.
Troubleshooting for remote control failure and playback issues.
Solutions for recording failures and disc condition problems.
Advice on handling condensation to prevent operational issues.
Details media types, sampling frequencies, and frequency response.
Covers signal-to-noise ratio, dynamic range, THD, and input/output levels.
Information on power supply, physical dimensions, weight, and included accessories.
To Next Page
